IEC Test Equipment

四月 7, 2018
Luminaires Draught-proof enclosure- IEC60598 Annex D

Luminaires Draught-proof enclosure- IEC60598 Annex D

The following recommendations refer to the construction and use of a suitable draught-proof enclosure for luminaires, as required for the tests of normal and abnormal operation. Alternative constructions for draught-proof enclosures are suitable if it is established that similar results are obtained.
四月 4, 2018
Nickel sleeve IEC60360 Temperature Rising Nickel Lampholders

Nickel sleeve IEC60360 Temperature Rising Nickel Lampholders

Figure 3 — Approximate dimensions of test lampholder for E14/20 cap Figure 4 — Approximate dimensions of test lampholder for E17/20 cap Figure 5 — Approximate dimensions of test la […]
四月 3, 2018
6.2-of-IEC62560-Bending-moment

6.2 of IEC62560 Bending moment, axial pull and mass

IEC62560 6.2 Bending moment, axial pull and mass The value of the bending moment, imparted by the lamp at the lampholder shall not exceed the value given in Table 2. The bending mo […]
三月 8, 2018
Test circuit for testing a non-dimmable lamp at a dimmer or electronic switch

IEC62560 Figure 8 Test circuit for testing a non-dimmable lamp at a dimmer or electronic switch

According to standard: IEC62560 Figure 8、BS EN 62560 Figure 8、EN 62560 Figure 8 Model: SC-62560F8
三月 2, 2017

Drip Box for IPX1 and IPX2

Product information:   This test device is to verify Protection against Vertically Falling Water Drops. It is designed and manufactured in accordance with the standard require […]
三月 1, 2017

Screwed Glands Tester

Product details:   The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed glands shall be fitted with a cylindrical metal rod having […]
三月 1, 2017

Test Cylinder

Product details:   This device conforms to the IEC60884.1 clause 24.3. Cylindrical which is made of steel is used to check the reliability of the fixed structure of the socket […]
三月 1, 2017

Tumbling Barrel Tester

Product details:   This tester conforms to the standard requirement of VDE0620 、IEC68-2-32、BS1363.1、EN50075、UL60730. it is used to check the drop resistance of electrical accessori […]
三月 1, 2017

Flexible Cable Torque Tester

Product details:   This tester conforms to IEC60884-1 clause 23.2.After testing cord retention. the flexible cable is subjected for 1 min to a torque as specified in the follo […]