IP Code Test Equipment

Ingress Protection Test Equipment is used to determine the degree of protection provided by a product enclosure. The level of protection provided by an enclosure is represented by an "IP" code (i.e. IP66).
The first digit indicates protection against ingress of solid foreign objects. Many of these tests require accessibility probes. The equipment for these tests is provided below. All equipment fully complies with IEC 60529 (IP Code standard) and all other international standards with similar tests.

Use the table below to find products that comply with a specific IP Code test:

IPX1 And IPX2 Drop Box test device

七月 27, 2019
IPX1-2 Drop Box Test Chambers

IPX1 And IPX2 Drop Box Test Chambers Model: JY-IPX12C

IPX1 And IPX2 Drop Box Test Chambers,This test device is to verify Protection against Vertically Falling Water Drops. It is designed and manufactured in accordance with the standard requirement of IEC60529 clause IPX1 and IPX2.1.The drip box sizes can make different size according to request. 2.The size of the drip box is different depending on the size of the test product. 3.the size can be customized by the customers’ need.
七月 27, 2019
IPX12B-IPX1 And IPX2 Drop Box test device

IPX1 And IPX2 Drop Box test device Model: JY-IPX12B

The SC-IPX12B Drip Box Tester is designed to meet the requirements of IEC 60529. The tester can accommodate one of three different size drip boxes - 500mm x 500mm,800mm x 800mm, or 1000mm x 1000mm.The flow rate of drips is set and monitored by a user friendly touch screencontroller that sets the water pressure to the drip box. The drip box and thewater system is fully enclosed and filtered to minimize clogging of anynozzles. This test device is to verify Protection against Vertically Falling Water Drops. It is designed and manufactured in accordance with the standard requirement of IEC60529 clause IPX1 and IPX2.
七月 27, 2019

IPX1 And IPX2 Drop Box device Model: JY-IPX12A

The drip box test is one of several methods used to test the water protection capabilities of enclosures for electronic items that are expected to be exposed to rain or water spray. This test is used to meet the requirements of IPX1 and IPX2 in IEC60529. The drip box test subjects an enclosure to vertically falling drop lets much as a product might see during rain. The test has two parts. The first has the specimen sit in the orientation of its intended use. The second has the specimen tilted 15° from vertical in four directions to simulate a blowing rain. This second test is also done with a higher flow rate of drips.

IPX3 and IPX4 spraying and splashing water Test Device

七月 29, 2019
IPX3 and IPX4 Spray Nozzle

IPX3 and IPX4 Hand Held Spray Nozzle

IPX3 and IPX4 Hand Held Spray Nozzle  For checking the protection against water, to prove the degree of protection IPX3 and IPX4. Positioning of the shield allows for both “P […]
七月 29, 2019
IPX3-IPX4 Oscillating Tube Test Chamber

IPX3-IPX4 Oscillating Tube spraying and splashing water Test Chambers

IPX3-IPX4 Oscillating Tube spraying and splashing water Test Chambers, The oscillating tube will have spray holes over 120° of the tube for IPX3 and over the full 180° for IPX4. In IPX3 the tube will oscillate to 60° either side of the vertical. For IPX4 the tube travels through an angle of almost 340°. The specimen needs to be placed within 200mm of the tube. For this reason different size tubes are needed to test different size specimens.
七月 29, 2019
IPX3-IPX4 Oscillating Tube spraying and splashing water Test device

IPX3-IPX4 Oscillating Tube spraying and splashing water Test device

  For checking the protection against water with spray nozzle of 0,4 mm bore are used to prove the degrees of protection for the second characteristic numerals 3 and 4 “Protec […]

IPX5-IPX6 low and high pressure jetting water test device

八月 1, 2019
IPX5 & IPX6 Jet Water Test Device (Model:JY-IPX56C)

IPX5 & IPX6 Jet Test Chamber (Model:JY-IPX56C)

IPX56 powerful water jets      Test device to verify protection against water jets, For checking the protection against ingress of water to prove the degrees of protection with the […]
八月 1, 2019
IPX5 & IPX6 Jet Test Chamber Model:JY-IPX56B

IPX5 & IPX6 Jet Test Chamber (Model:JY-IPX56B)

IPX56 powerful water jets      Test device to verify protection against water jets, For checking the protection against ingress of water to prove the degrees of protection with the […]
八月 1, 2019
IPX5-6 Jet Test Set with Supply System

IPX5-6 Jet Test Set with Supply System

IPX56 powerful water jets      Test device to verify protection against water jets, For checking the protection against ingress of water to prove the degrees of protection with the […]

IPX8 Continuous Immersion Test device

八月 1, 2019
IPX8 Continuous Immersion Test device JY-IPX8S

IPX8 Continuous Immersion Test device JY-IPX8S

IPX8 Continuous Immersion IPX8 IMMERSION PRESSURE TEST DEVICE is intended for testing protection against ingress of water, IPX8 Immersion beyond 1 m, and the equipment is suitable […]
八月 1, 2019
IPX8 Continuous Immersion Test device JY-IPX8A

IPX8 Continuous Immersion Test device JY-IPX8A

IPX8 Continuous Immersion IPX8 IMMERSION PRESSURE TEST DEVICE is intended for testing protection against ingress of water, IPX8 Immersion beyond 1 m, and the equipment is suitable […]

IPX9K high-pressure/steam-jet cleaning Test device

八月 6, 2019
IPX9K high-pressure/steam-jet cleaning

IPX9 IPX9K High-pressure and Steam-jet Test Chamber

IPX9K High-pressure and Steam-jet Test device,IPX9K High Pressure Hot Temperature Fan Jet Test Chamber Confirm to standards:IEC60529 IPX9K,EN 60529 IPX9K,ISO20653-2006,ISO30653-2006,QC/T 417.1-200,TSC1000G,DIN40050-9 and so on.