Plug and Socket Gauges and apparatus

Product Image
Product Description

BS1363 Figure 2a — Apparatus for mechanical strength test on resilient covers (see Clause 9)

Figure 2a) — Apparatus for mechanical strength test on resilient covers (see Clause 9)   Figure 2a) — Apparatus for mechanical strength test on resilient covers BS1363-1  13 A plugs, socket-outlets, adaptorsand connection units — Part 1: Specifi...

BS1363 Figure 8 —Plug pin deflection test apparatus for resilient plugs

It is designed and manufactured in accordance with the standard requirement of  BS1363 Figure 8  and Cl. 12.12. Plug pin deflection test apparatus for resilient plugs   12.12 The degree of flexibility of mounting of the plug pins or the angular ...

“GO” gauge for connectors to IEC60320 standard sheet C1-C23

IEC60320 gauge Application: J&Y Sourcing offers a wide range of gauge to meet the most common standards including those from IEC, EN, UL, GB,DIN,VDE and others. Such standards require the checking of size & definition etc. these gauges are co...

Screwed Glands Tester

Product details:   The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed glands shall be fitted with a cylindrical metal rod having a diameter equal to the nearest whole number of millimetres below the ...

Test Cylinder

Product details:   This device conforms to the IEC60884.1 clause 24.3. Cylindrical which is made of steel is used to check the reliability of the fixed structure of the socket.   Technical parameters:   1、Radius:R > 200mm,it is equa...

Tumbling Barrel Tester

Product details:   This tester conforms to the standard requirement of VDE0620 、IEC68-2-32、BS1363.1、EN50075、UL60730. it is used to check the drop resistance of electrical accessories. The falling times can be preset. The device stops working automati...

Flexible Cable Torque Tester

Product details:   This tester conforms to IEC60884-1 clause 23.2.After testing cord retention. the flexible cable is subjected for 1 min to a torque as specified in the following table: Torque test values for cord anchorages Rating of plug o...

Dielectric strength test instrument

Product details:   This testing device conforms to the IEC60065 figure 6、UL1310 clause 40.2. It is used to test the dielectric strength of the insulating material. The clamp is applicable of two kinds: Ф5-100 andФ6.8-50. For different testing samples...

Climatic Chamber

Product details:   This chamber is in accordance with the IEC60884.1 standard which is used for the heat ageing test and electrical insulation test of the plasticity material (rubber, plastic). It is equipped with the digital display of the temp...

Electrical Contact Indicator for Probe

Product details:   This device is designed and manufactured according to the standard of IEC60335. It is used with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with ...