Probes, Fingers and Pins

八月 9, 2019
IEC 60529 IEC61032 IP20C 12.5mm ball probe with handle

IEC60529 IEC61032 IP20C 12.5mm ball probe with handle

IEC61032 IP20C 12.5mm ball probe with handle   This 12.5mm ball probe is intended to verify the basic protectiion against access to hazardous parts. It’s also used to ve […]
八月 9, 2019
IEC 60529 IP4X 1.0mm Test Wire

IEC60529 IP4X 1.0mm Test Wire

IEC 60529 IP4X 1.0mm Test Wire IEC 60529 IP4X 1.0mm Test Wire is intended to verify the protection of persons against access to hazardous parts. It’s also used to verify the […]
八月 9, 2019
IEC60529 IP3X Test Rod 2.5mm diameter

IEC60529 IP3X Test Rod 2.5mm diameter

Description: This rod is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a tool. Confir […]
八月 9, 2019

IEC 60529 IP2X Jointed Test Finger Probe

Description: The IEC 60529 IP2X Jointed Test Finger Probe can meet the requirements of IEC61032 standard. The IEC 60529 IP2X Jointed Test Finger Probe is intended to verify the bas […]
八月 9, 2019
IEC 60529 IP1X 50mm Sphere Test Probe

IEC60529 IP1X 50mm Sphere Test Probe

IEC 60529 IP1X 50mm Sphere Test Probe This IEC 60529 IP1X 50mm Sphere Test Probe is also in accordance with IEC 61032 Figure 1. It is intended to verify the basic protectiion again […]
十二月 5, 2018
Rod probe UL1278 Figure 10.4 SM209 (1)

Rod probe UL1278 Figure 10.4 SM209

...horizontal direction of a vertically oriented rod probe 1/16 inch in diameter and 2-3/4 inch long, see Figure 10.4
十二月 5, 2018
Triangle probe UL1278 Figure 10.3 SM208

Triangle probe UL1278 Figure 10.3 SM208

a triangle probe 1/16 inch thick and in the form of an isosceles triangle having a base of 2-3/4 inches and an altitude of 5-1/2 inches, see Figure 10.3
十一月 28, 2018
Bar probe UL1278 Figure 10.2 SM207

Bar probe UL1278 Figure 10.2 SM207

The shape and size of an opening which permits the vertically downward entrance of a bar probe 1/2 inch (12.7 mm) wide and 1/16 inch (1.6 mm) thick, see Figure 10.2 ...
十一月 22, 2018
Cone Probe UL1278 Figure 10.1 SM206

Cone Probe UL1278 Figure 10.1 SM206

The shape and size of an opening are such that a test gauge in the form of a right-circular cone having a base diameter of 2-3/4 inches (69.9 mm) and an altitude of 5-1/2 inches (139.7mm), see Figure 10.1