Product Image
Product Description

Screwed Glands Tester

Product details:   The device is used to check screwed glands, and conform to the IEC60598-1 clause 4.12.5. Screwed glands shall be fitted with a cylindrical metal rod having a diameter equal to the nearest whole number of millimetres below the ...

Test Cylinder

Product details:   This device conforms to the IEC60884.1 clause 24.3. Cylindrical which is made of steel is used to check the reliability of the fixed structure of the socket.   Technical parameters:   1、Radius:R > 200mm,it is equa...

Tumbling Barrel Tester

Product details:   This tester conforms to the standard requirement of VDE0620 、IEC68-2-32、BS1363.1、EN50075、UL60730. it is used to check the drop resistance of electrical accessories. The falling times can be preset. The device stops working automati...

Flexible Cable Torque Tester

Product details:   This tester conforms to IEC60884-1 clause 23.2.After testing cord retention. the flexible cable is subjected for 1 min to a torque as specified in the following table: Torque test values for cord anchorages Rating of plug o...

Dielectric strength test instrument

Product details:   This testing device conforms to the IEC60065 figure 6、UL1310 clause 40.2. It is used to test the dielectric strength of the insulating material. The clamp is applicable of two kinds: Ф5-100 andФ6.8-50. For different testing samples...

Climatic Chamber

Product details:   This chamber is in accordance with the IEC60884.1 standard which is used for the heat ageing test and electrical insulation test of the plasticity material (rubber, plastic). It is equipped with the digital display of the temp...

Electrical Contact Indicator for Probe

Product details:   This device is designed and manufactured according to the standard of IEC60335. It is used with the testing probe for the convenience and correctness. In the two output electrodes, the low potential (the red one) is connected with ...

Measuring gauge for Plug and socket

Product information:   These measuring gauge confirm to the standard of GB2099.1-2008 clause9、GB1002-2008 and GB1003-2008 which are used for the dimensional measurement and verification of the plug socket for household and similar use. They are ...

Socket-outlet Torque Balance

Product information:   The SC plug torque tester conforms to the standard of IEC60065 figure 11. It is used for checking whether the mechanical stress which occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in ...

High temperature Indentation Device

Product details:   This testing device conforms to the standard requirement of IEC540.8.1. It is used to check the deformation degree with the thermal pressure of the PVC insulating layer and sheath.   Technical parameters:   Number of work...