Standards & Clauses:
IEC60884-1:2013 ”Plugs and socket-outlets for household and similar purposes- Part1:General requirements” clause 9.1
DIN VDE 0620-1:2010 ”Plugs and socket-outlets for household and similar purposes – Part 1: General requirements on fixed socket-outlets”
Samples and Restrictions:
German plugs and sockets
Application:
Checking dimensions of plugs and sockets
Test Principle:
Check the shapes and sizes of the plugs and sockets by the gauges, to verify the plugs and sockets are compliance with the standard ranges
Structure:
Refer to DIN VDE 0620-1:2010
Technical Parameters:
IEC60884-1:2013 & DIN VDE 0620-1:2010 Gauge List
|
Figure number |
Project name |
Number |
|
DIN-VDE0620-1-Lehre1 |
Socket R gauge (5.0,5.8,6.0) |
3 |
|
DIN-VDE0620-1-lehre2 |
Minimum opening width and minimum pull out force of contact jack |
2 |
|
DIN-VDE0620-1-Lehre3 |
Bipolar plug force |
1 |
|
DIN-VDE0620-1-Lehre5 |
To test the first time contact closure interval gauge |
1 sets of /4 parts |
|
DIN-VDE0620-1-Lehre6 |
Pin diameter |
1 sets of /4 parts |
|
DIN-VDE0620-1-Lehre7 |
Pin distance |
1 /2 combination |
|
DIN-VDE0620-1-Lehre9 |
Interchangeability test plug gauge |
1 |
|
DIN-VDE0620-1-Lehre10-A |
The impossibility of the contact of the single pole contact hole A |
1 |
|
DIN-VDE0620-1-Lehre10-B |
Unipolar contact hole contacts not the possibility of B |
1 |
|
DIN-VDE0620-1-EN50075 figure 2 |
Interchangeability test plug gauge |
1 |
