For checking the protection against water with spray nozzle of 0,4 mm bore are used to prove the degrees of protection for the second characteristic numerals 3 and 4 “Protection against Spraying Water” resp. “Protection against splashing Water”.
The oscillating tube test is one of several methods used to test the water protection capabilities of enclosures for electronic items that are expected to be exposed to rain or water spray.
This test is used to meet the requirements of IPX3 and IPX4 in IEC 60529. In the test described in IPX3 and IPX4 with an oscillating tube, the specimen is placed in the center point of the semicircle defined by the oscillating tube. It is then subjected to a spray of water at a defined pressure to test for leakage.
The oscillating tube will have spray holes over 120° of the tube for IPX3 and over the full 180° for IPX4. In IPX3 the tube will oscillate to 60° either side of the vertical. For IPX4 the tube travels through an angle of almost 340°. The specimen needs to be placed within 200mm of the tube. For this reason different size tubes are needed to test different size specimens.
Features
—Touch screen controller and PLC
—Oscillating tubes are stainless steel
—Stainless steel nozzles removable for cleaning or replacing
—Nozzles can be turned on or off to adjust the arc of the spray from the tube
—Water supply unit includes water filter, pump, flow meter, electromagnetic valve and switch valve.
—Stainless steel specimen support with easy height adjustment and angle 15 degrees adjustment.
— Stainless steel specimen support with fully sealed to prevent water leakage
— Stainless steel specimen support speed and angle can be set on the touch screen is adjustable
—-Power supply waterproof rotation socket for sample
| NO. | Item | Parameters | ||
| JY-IPX34A-1600 | JY-IPX34A-1200 | JY-IPX34A-800 | ||
| 1 | Oscillating tube with radius（mm） | R1600 | R1200mm | R800 |
| 2 | External Dimensions（mm） | L4000*D3200*H2800 | L3200*D2400*H2400 | L2400*D1800*H2000 |
| 3 | Flow Meters（L/mm） | 0-10 L/min | 0-6L/min | 0-4L/min |
| 4 | Turntable Table Diameter（mm） | ∮1000 | ∮800 | ∮600 |
| 5 | Turntable Height | 1750-2350mm | 1350-1950mm | 950-1550mm |
| 6 | Tube Inner Diameter（mm） | Over 15 | Over15 | 15 |
| 7 | Nozzle (mm) | 0.4 mm | 0.4 mm | 0.4 mm |
| 8 | Oscillating Angles | IPX3: 60° from center (120° total) IPX4: 360° from center (near 360° total) (Standard accepts lesser angle to allow room for sample support) |
IPX3: 60° from center (120° total) IPX4: 360° from center (near 360° total) (Standard accepts lesser angle to allow room for sample support) |
IPX3: 60° from center (120° total) IPX4: 360° from center (near 360° total) (Standard accepts lesser angle to allow room for sample support) |
| 9 | Oscillating Speed | 4 sec. for 2 x 120° for IPX3 (10 RPM) 12 sec. for 2 x 360° for IPX4 (10 RPM) |
4 sec. for 2 x 120° for IPX3 (10 RPM) 12 sec. for 2 x 360° for IPX4 (10 RPM) |
4 sec. for 2 x 120° for IPX3 (10 RPM) 12 sec. for 2 x 360° for IPX4 (10 RPM) |
| 10 | Oscillating Tube Material | SUS304 Stainless steel | SUS304 Stainless steel | SUS304 Stainless steel |
| 11 | Turntable Speed | 1-5r/min | 1-5r/min | 1-5r/min |
| 12 | Protection | Leakage, water shortage, short circuit | Leakage, water shortage, short circuit | Leakage, water shortage, short circuit |
| 13 | Power | 250V or 110V，1KW | 250V or 110V，1KW | 250V or 110V，1KW |
| 14 | Tube Radius Size Options: 200 mm, 400 mm, 600 mm, 800 mm, 1000 mm (Larger system available for 1200 mm, 1400 mm, and 1600 mm tubes) |
|||
1.The sizes can make different size according to request.
2.The size is different depending on the size of the test product.
3.The size can be customized by the customers’ need.
