IPX7 IMMERSION TANK

Application IPX7 IMMERSION TANK is intended for testing protection against ingress of water, IPX7 ingress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed in water under standardized conditions of pressure and time, and it is constructed in compliance with IEC 60529. Immersion up to 1 m, 0.15m above top 1m above bottom, Ingress of wate ...
SEND INQUIRY

You can make an inquiry about this product.
Your e-mail will not be leaked.

  • PRODUCT DETAIL

Application

IPX7 IMMERSION TANK

IPX7 IMMERSION TANK

is intended for testing protection against ingress of water, IPX7 ingress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed in water under standardized conditions of pressure and time, and it is constructed in compliance with IEC 60529.

Immersion up to 1 m, 0.15m above top 1m above bottom, Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion). Test duration: 30 minutes and Immersion at depth of 1m

According to standard

IEC 60034-5 , IEC 60529 , IEC60598, IEC 60947-1 ,EN 60335-1 , EN 60950,VDE 0570  VDE 0630 ,IEC60745-1,GB4208, GB7000.1

Specifications

—Level logo : 1000mm, transparent water level can be observed

—After the tank filled with water without leakage at the bottom with a drain valve into the sailor , convenient water discharge .

—With a universal brake casters , eays mobile and fixed

—Outer Dimensions: W*D*H=1000mm*500mm*1500mm (total height of 1750mm including casters)

—Weight: 100KG

 

FOLLOW US