Tumbling Barrel Tester Machine IEC Test Equipment Rotating Barrel Test

Tumbling Barrel Tester Machine IEC Test Equipment Rotating Barrel Test

SEND INQUIRY

You can make an inquiry about this product.
Your e-mail will not be leaked.

  • PRODUCT DETAIL
Tumbling Barrel Tester Machine IEC Test Equipment Rotating Barrel Test

Tumbling Barrel Tester Machine IEC Test Equipment Rotating Barrel Test

Tumbling Barrel Tester Machine IEC Test Equipment Rotating Barrel Test details:

 

Tumbling Barrel Tester Machine IEC Test Equipment Rotating Barrel Test conforms to the standard requirement of VDE0620 ,IEC68-2-32,BS1363.1,EN50075,UL60730. Tumbling Barrel Tester Machine IEC Test Equipment Rotating Barrel Test is used to check the drop resistance of electrical accessories. The falling times can be preset. The device stops working automatically when the preset times are reached.

 

Tumbling Barrel Tester Machine IEC Test Equipment Rotating Barrel Test

Tumbling Barrel Tester Machine IEC Test Equipment Rotating Barrel Test

Tumbling Barrel Tester Machine IEC Test Equipment Rotating Barrel Test Technical parameters:

Model SC-GT-2
Power Supply 220V 50Hz
Speed of rotation 5 r/min
Falling times 10 times/min
counter 0~9999
Material 3 mm steel and Block of wood and plastics laminated sheet
Drip Height 500 mm
Dimension W*D*H=630mm x 600mm x 1250mm
Chute Length 275mm
Conforms to standard IEC60068-2-32, IEC60884.1, EN50075

Tumbling Barrel Tester Machine IEC Test Equipment Rotating Barrel Test Operation steps:

1.Set the number of drop, it will immediate effect after reset. User needs to press the reset button when change setting value of the drop times each time, otherwise, the counter will according to the original setting value to work.
2. Need to close the door after the specimen is put inside.
3.Press the “Start” button and start the test.
4.The test machine will stop working when achieve to the setting value, press the “Reset” button to eliminate the sound alarm.
5. Take out the sample, and judge the test results.
Note: The power supply of this machine is single phase 220V ±10%, 50HZ, the voltage should be guaranteed within the specified range, otherwise it will affect the rotating speed of the barrel (and will damage the motor).

 

Tumbling Barrel Tester Machine IEC Test Equipment Rotating Barrel Test Notice:

When the box body is stopped in the inclined position, re-start the testing machine, make it stop when the box goes to the proper position, so that not to damage the machine transmission parts.

 

More info, please contact:

www.iectesting.com

info@iectesting.com

FOLLOW US