4月 7, 2018
The following recommendations refer to the construction and use of a suitable draught-proof
enclosure for luminaires, as required for the tests of normal and abnormal operation.
Alternative constructions for draught-proof enclosures are suitable if it is established that
similar results are obtained.
5月 5, 2017
Application IPX8 IMMERSION PRESSURE TEST DEVICE is intended for testing protection against ingress of water, IPX8 Immersion beyond 1 m, and the equipment is suitable for continuous […]
3月 2, 2017
Product information: This test device is to verify Protection against Vertically Falling Water Drops. It is designed and manufactured in accordance with the standard require […]
3月 1, 2017
Product details: This tester conforms to the standard requirement of VDE0620 、IEC68-2-32、BS1363.1、EN50075、UL60730. it is used to check the drop resistance of electrical accessori […]
6月 7, 2016
IPX5 and IPX6 call for a specimen to be sprayed with water from all practicable directions. IPX5 specifies a nozzle with a 6.3mm diameter opening and a flow of 12.5l/min. IPX6 specifies a nozzle with a 12.5mm diameter opening and a flow rate of 100l/min.Nozzle Diameter : 6.3mm(IPX5) 12.5mm(IPX6)
Pressure Gauge : 0 – 1.6 bar
4月 10, 2016
The UL Rain Spray test shall to consist 3 spray heads mounted in a water supply pipe rack as show UL 1278 and UL 1598, the spray heads shall be according to UL 1278 and UL 1598.The water pressure shall be maintained at 34.5Kpa(5PSI) at each spray head.
4月 10, 2016
IPX3 and IPX4 Spray Nozzle (Model:JY-IPX34-SN) Application The Spray Nozzle is an alternative to the Oscillating Tube Tester for establishing the degree of protection against ingre […]
3月 2, 2016
Product information: Oscillating tube tester is designed and manufactured in accordance with the standard requirement of IEC60529 IPX3 and IPX4. It is used for the waterproof test […]
3月 1, 2016
Product details: The device is made and manufactured according to the related standard requirement of temperature rising, such as IEC 60884 – 2006 (Figure 44), VDE0620 etc. It is […]
11月 11, 2020
Description: Conform to IEC60335-1 clause20.1 Surface diameter: 800mm Device is used to test the stability of  […]
11月 11, 2020
Description: Conform to IEC60335-1 clause20.1 Surface diameter: 600mm Device is used to test the stability of an a […]
11月 11, 2020
Description: Conform to IEC60335-1 clause20.1 Surface diameter: 1200mm Device is used to test the stability of an […]
11月 11, 2020
Description: Conform to IEC60335-1 clause20.1 Surface diameter: 1000mm Device is used to test the stability of an […]
11月 11, 2020
Description: Conform to IEC60335-1 clause20.1 Surface diameter: 800mm Device is used to test the stability of  […]
11月 6, 2020
1) Introduction: The electric contact power indicator is made according to IEC60335 for standard electric shock prevention test. It provides a 40-45V power supply in the IP test fo […]
11月 6, 2020
Appliance: Vertical drop hammer test device is designed and manufactured according to IEC60068-2-75 (GB / T2325.55) standard, it is used to carry on the anti-impact ability test to […]
11月 5, 2020
Standard:UL/IEC/EN60601 test probe Kit Contains: Commodity NameIEC Jointed finger probe(w/banana jack in handle)Impact test ball with 50mm diameterShort test pin probeRigid finger […]
8月 31, 2020
Mandrel Test Device DETAIL:Mandrel Test Device confirms to IEC60950、IEC60065-1. Insulation anti damage strength verification for non separable thin layer materials. Non separable t […]